Home < Dental Professional < SS System < Prosthetics
|
ø4.8 |
ø6.0 |
| 4.0 |
SSS484 |
SSS604 |
| 5.5 |
SSS485 |
SSS605 |
| 7.0 |
SSS487 |
SSS607 |
- ㆍUse for making general cement-type prosthesis.
- ㆍAbutment and screw in one
- ㆍ8° Morse taper design with stable connection
- ㆍCross-section design for the prevention of prosthesis rotation
- ㆍø4.8 : Use a solid abutment driver.
- ㆍø6.0 : Use a 1.2 hex driver.
- ㆍPacking unit : Abutment + Healing cap
- ㆍTightening torque : 30 Ncm
| |
ø4.8 |
ø6.0 |
| 4.0 |
SSC484 |
SSC604 |
| 5.5 |
SSC485 |
SSC605 |
| 7.0 |
SSC487 |
SSC607 |
- Use for the protection of solid abutments in the oral cavity and to minimize
the patient's discomfort.
- ㆍApplicable as a substructure of temporary prosthesis
- ㆍConvenient locking
- ㆍPacking unit : Protect Cap
| |
ø4.8 |
ø6.0 |
| 4.0 |
SSSRC484 |
SSSRC604 |
| 5.5 |
SSSRC485 |
SSSRC605 |
| 7.0 |
SSSRC487 |
SSSRC607 |
- ㆍPacking unit : Retraction cap
- ㆍPossible to take impression in accuracy for margin
| |
ø4.8 |
ø6.0 |
| 4.0 |
SSIC484 |
SSIC604 |
| 5.5 |
SSIC485 |
SSIC605 |
| 7.0 |
SSIC487 |
SSIC607 |
- ㆍSolid abutment component for taking an impression
- ㆍColor indication enables the easy identification of abutments of varying
lengths 4.0mm(Yellow), 5.5mm(Gray), 7.0mm(Blue)
- ㆍPacking unit : Impression Coping
- ㆍSolid Positioning Cylinder + Solid Impression Cap
= Solid Impression Coping
| |
ø4.8 |
ø6.0 |
| 4.0 |
SSSA484 |
SSSA604 |
| 5.5 |
SSSA485 |
SSSA605 |
| 7.0 |
SSSA487 |
SSSA607 |
- ㆍMake aesthetic oral abutments on the working model
- ㆍSmall groove for indication of G/H
- ㆍColor indication enables the easy identification of abutments of varying
lengths 4.0mm(Yellow), 5.5mm(Gray), 7.0mm(Blue)
- ㆍPacking unit : Lab Analog
| |
ø4.8 |
ø6.0 |
| Single |
SSSP480S |
SSSP600S |
| Bridge |
SSSP480B |
SSSP600B |
- ㆍUse as a framework of prosthesis by connecting to solid lab analogs
- ㆍColor indication facilitates the identification of different cases
Single (Red color), Bridge (White color)
- ㆍAfter prosthetic casting, the margin may be adjusted by a special-purpose
reamer
- ㆍPacking unit : Plastic Coping
| Platform |
ø4.8 |
ø6.0 |
| Code |
SSIP480 |
SSIP600 |
- ㆍSolid abutment components for taking an impression
- ㆍUse by connecting to solid positioning cylinders.
- ㆍConvenient locking
- ㆍPacking unit : Impression Cap
| Platform |
ø4.8 |
ø6.0 |
| Code |
SSSLA480 |
SSSLA600 |
- ㆍImpression components used for cutting solid abutment
- ㆍMake a fixture platform on the working model
- ㆍPacking unit : Shoulder Analog
| Platform |
ø4.8 |
ø6.0 |
| Code |
SSSAP480 |
SSSAP600 |
- ㆍImpression components used for cutting solid abutments
- ㆍUse by connecting to solid shoulder analogs
- ㆍSupplementary component for preventing fracture on a working model
- ㆍPacking unit : Shoulder Analog Pin
